Raex® S700MC

Download data sheet

Select Language

General Product Description

Dimension Range

Mechanical Properties

Thickness (mmin)	Yield strength R_eH¹⁾ (min MPaksi)	Tensile strength R_m (MPaksi)	Elongation A₅ (min %)	Min. inner bending radius for a 90° bend²⁾ (x t)
3.000.118	700101	750 - 950108 - 137	12	1.5
3.01 - 6.000.119 - 0.236	700101	750 - 950108 - 137	12	2.0
6.01 - 10.000.237 - 0.394	700101	750 - 950108 - 137	12	2.5

Thickness
(mmin)

3.000.118

Yield strength R_eH¹⁾
(min MPaksi)

700101

Tensile strength R_m
(MPaksi)

750 - 950108 - 137

Elongation A₅
(min %)

Min. inner bending radius for a 90° bend²⁾
(x t)

1.5

Thickness
(mmin)

3.01 - 6.000.119 - 0.236

Yield strength R_eH¹⁾
(min MPaksi)

700101

Tensile strength R_m
(MPaksi)

750 - 950108 - 137

Elongation A₅
(min %)

Min. inner bending radius for a 90° bend²⁾
(x t)

2.0

Thickness
(mmin)

6.01 - 10.000.237 - 0.394

Yield strength R_eH¹⁾
(min MPaksi)

700101

Tensile strength R_m
(MPaksi)

750 - 950108 - 137

Elongation A₅
(min %)

Min. inner bending radius for a 90° bend²⁾
(x t)

2.5

The mechanical properties are tested in the longitudinal direction.

¹⁾ If R_eH is not applicable then Rp_0.2 is used. On thicknesses >8 mm the minimum yield strength may be 20 MPa lower.

²⁾ For both longitudinal and transverse direction.

Impact Properties

Product	Min. impact energy for longitudinal testing, Charpy V 10x10 mm test specimen ¹⁾
Raex® S700MC	40 J / -20 °C ²⁾29 ft-lbs / -4 °F ²⁾

Product

Raex® S700MC

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimen ¹⁾

40 J / -20 °C ²⁾29 ft-lbs / -4 °F ²⁾

¹⁾ Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

²⁾ Default impact testing is in -20 ^oC.

Chemical Composition (heat analysis)

C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Al (max %)	Nb (max %)	V (max %)	Ti (max %)	Mo (max %)	B (max %)
0.12	0.6 ¹⁾	2.10	0.025	0.015	0.015	0.09	0.20	0.22	0.5	0.005

C
(max %)

0.12

Si
(max %)

0.6 ¹⁾

Mn
(max %)

2.10

P
(max %)

0.025

S
(max %)

0.015

Al
(max %)

0.015

Nb
(max %)

0.09

V
(max %)

0.20

Ti
(max %)

0.22

Mo
(max %)

0.5

B
(max %)

0.005

¹⁾ Default silica level is 0.15 - 0.20 which fullfills category B for galvanizing.

Carbon Equivalent CET(CEV)

Thickness (mmin)	3.00 - 10.000.118 - 0.394
Typ CET(CEV)	0.27 (0.41)

Thickness (mmin)

Typ CET(CEV)

3.00 - 10.000.118 - 0.394

0.27 (0.41)

Tolerances

Thickness

Tolerances according to EN 10051 2/3 Category D.

Length and Width

Tolerances according to EN 10051.

Shape

Tolerances according to EN 10051.

Flatness

Flatness tolerance is 6 mm/m and fullfills the requirements in EN 10051.

Flatness guarantees only apply for cut to length sheets.

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Delivery Conditions

The delivery condition is Thermomechanically Rolled. Sheets are available in as rolled surface condition with mill edge.

Fabrication and Other Recommendations

Welding, bending and machining

Welding, bending and machining recommendations can be found in brochures at www.raexsteel.com or consult Tech Support.

The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 550°C.

Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.