Download data sheet

Mechanical Properties

Product type
Product type
Sheet
Thickness 1)
(mmin)
3.00 - 8.000.118 - 0.315
Width 1)
(mmin)
1000 - 186039.370 - 73.228
Length 1)
(mmin)
2000 - 1200078.740 - 472.440
Hardness 2)
(HBW)
360 - 440
Typical yield strength
(MPaksi), not guaranteed
1100159
Typical tensile strength
(MPaksi), not guaranteed
1250181
Typical Elongation A (%),
not guaranteed
10
Product type
Product type
Plate
Thickness 1)
(mmin)
6.00 - 40.000.236 - 1.575
Width 1)
(mmin)
1000 - 320039.370 - 125.984
Length 1)
(mmin)
2000 - 1200078.740 - 472.440
Hardness 2)
(HBW)
360 - 440
Typical yield strength
(MPaksi), not guaranteed
1100159
Typical tensile strength
(MPaksi), not guaranteed
1300188
Typical Elongation A (%),
not guaranteed
10
Product type
Product type
Plate
Thickness 1)
(mmin)
40.01 - 80.001.575 - 3.150
Width 1)
(mmin)
2000 - 250078.740 - 98.425
Length 1)
(mmin)
4000 - 9500157.480 - 374.015
Hardness 2)
(HBW)
360 - 440
Typical yield strength
(MPaksi), not guaranteed
1100159
Typical tensile strength
(MPaksi), not guaranteed
1300188
Typical Elongation A (%),
not guaranteed
10

1) More detailed information on dimensions is provided from RaexSmart. Please contact your local sales representant for more information.

2) Brinell Hardness is measured, according to EN ISO 6506-1 on milled surface 0.3-3.0mm below surface. Hardness value is being announced in the material certificate.
Mechanical properties are tested in transverse direction and tabulated for information only and values are not shown in material certificate.

Impact Properties

Product
Product
Raex® AR 400 sheet & plate
Longitudinal test, typical impact energy,
Charpy V 10x10 mm test specimen 1)
30 J / -40 °C22 ft-lbs / -40 °F

1) Impact testing according to EN ISO 148-1 is performed on thickness ≥6mm. The specific value corresponds to a full-size specimen. Impact values are tabulated for information only and value are not shown in material certificate.

Chemical Composition

Product type
Product type
Plate
C
(max %)
0.23
Si
(max %)
0.80
Mn
(max %)
1.70
P
(max %)
0.025
S
(max %)
0.015
Cr
(max %)
1.50
Ni
(max %)
1.00
Mo
(max %)
0.50
B
(max %)
0.005
Product type
Product type
Sheet
C
(max %)
0.16
Si
(max %)
0.50
Mn
(max %)
1.60
P
(max %)
0.025
S
(max %)
0.010
Cr
(max %)
1.20
Ni
(max %)
1.00
Mo
(max %)
0.25
B
(max %)
0.005

The steel is grain refined.

Carbon Equivalent CET(CEV)

Product type
Thickness (mmin)
Product type
Thickness (mmin)
Typ CET(CEV) 1)
Sheet
3.00 - 8.000.079 - 0.315
0.30 (0.48)
Plate
6.00 - 20.000.236 - 0.787
0.30 (0.44)
Plate
20.01 - 32.000.788 - 1.260
0.35 (0.53)
Plate
32.01 - 80.001.260 - 3.150
0.35 (0.57)

1) The CEV value is being announced in the inspection certificate and the CET values are tabulated for information only.

Tolerances

Thickness

Plates tolerances according to EN 10029 Class A, tighter tolerances upon agreement. Sheets tolerances according to EN 10051 Category A.

Length and Width

For plate tolerances according to EN 10029, tighter tolerances upon agreement. Sheets tolerances according to EN 10051.

Shape

Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.

Flatness

For plate and sheet the flatness deviation is max 6 mm/m.

Surface Properties

According to EN 10163-2 Class A, Subclass 3.

Bending

Minimum inner bending radii for a 90° bend, t ≤ 20 mm are:

Sheets and plates, 3 x t (transverse) and 4 x t (longitudinal).

Delivery Conditions

The delivery condition is quenched. Sheets are available in as rolled surface condition with mill edge. Plates are available in as-rolled or shopprimed surface condition. Delivery requirements can be found in SSAB´s brochure at www.raexsteel.com.

Fabrication and Other Recommendations

Welding, bending and machining recommendations can be found in brochures at www.raexsteel.com or consult Tech Support.

Raex® AR is not intended for further heat treatment. Mechanical properties are achieved by quenching. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250°C.

Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.